Epson Stylus Pro 7710 - Page 209

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 209
Confidential
4.4.2.7 Right Cover
1. Remove the Control Panel. (p203)
2. Remove the Front Cover R. (p207)
3. Remove the Maintenance Tank R. (p208)
4. Remove the three screws that secure the Top Cover Support Base R, and remove
the Top Cover Support Base R.
A) Black, Phillips, Bind machine screw M4x8: two pieces
B) Black, Phillips, Bind P-tite with S.W & P.W. M4x12: one piece
Figure 4-21. Removing the Top Cover Support Base R
C H E C K
P O I N T
When you do not replace the Right Cover, skip the step 2.
B
A
Top Cover Support Base R