Epson Stylus Pro 7710 - Page 210

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 210
Confidential
5. Remove the nine screws that secure the Right Cover.
C) Silver, Phillips, Bind S-tite with S.W & P.W. M4x8: five pieces
D) Silver, Phillips, Bind machine screw M4x8: two pieces
E) Silver, Phillips, Bind P-tite M4x12: two pieces
NOTE: Some of Epson Stylus Pro 7900/7910/9900/9910 from a certain lot do not
have the screw on the second from the top on the rear right. Therefore, in
such a case, the screws to be removed here is eight pieces.
6. Remove the Right Cover.
Figure 4-22. Removing the Right Cover
C A U T I O N
When removing the Right Cover, make sure to hold the upper part
so as not to catch (damage) the FFC shown in the figure.
C
- Rear right -
E
D
Right Cover
FFC