Epson Stylus Pro 7710 - Page 218

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 218
Confidential
9. Remove the retaining ring and remove the Roll Paper Guide.
10. Pull out the pin from the shaft.
11. Remove the three screws that secure the Mounting.
C) Silver, Phillips, Bind machine screw M3x6: one piece
D) Black, Phillips, Bind machine screw M3x8: two pieces
12. Remove the Mounting.
13. Pull out the guide pin.
14. Remove the Roll Cover Assy by moving it to the left.
Figure 4-32. Removing the Roll Cover Assy (Right side)
Figure 4-33. Removing the Roll Cover Assy
When replacing or maintaining the Roll Cover Assy, carry out
the specified lubrication if necessary. (See Chapter 6 "
MAINTENANCE "
(Page 444).)
Lubrication
Lubrication
D
C
D
Pin
Retaining ring
Mounting
Roll Paper Guide
Shaft
Guide pin
- Right side -
Roll Cover Assy
Shaft