Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
PRODUCT DESCRIPTION Control Panel 60
Confidential
PRINTER SETUP
PAPER SKEW CHECK
ON
Sets whether to detect the paper skew or not.
Setting to OFF does not carry out the detection and printing is continued even if the paper is skewed. When this
setting is set to OFF, the user should have known the risk.
This setting is not available for cut sheet because the skew detection function after printing is not provided for
cut sheet.
√√
OFF
REFRESH MARGIN
ON
When this is set to ON, the top edge area of paper soiled by the previous borderless printing is automatically cut
off.
√√
OFF
AUTO NOZZLE
CHECK
ON: PERIODICALLY
Sets the execution timing for the auto nozzle check. When the nozzle clogging is detected, the cleaning starts
automatically. You can set the number of executions for cleaning from “1.5.2 Maintenance Mode (p73)”.
√√ON: EVERY JOB
OFF
PRINT NOZZLE
PATTERN
OFF The printer prints a nozzle check pattern automatically at the specified timing. This setting is available only
when roll paper is used.
When the set number of pages is reached, the nozzle check pattern is printed on the top of the page. The counter
for counting the pages is not reset even by power-off. When this setting is changed, the counter is cleared.
Printing patterns preset in the printer is not counted except the network status sheet.
√√
ON: EVERY PAGE
ON: EVERY 10 PAGES
INITIALIZE SETTING
EXECUTE All the settings made using the control panel are returned to their default. √√
Table 1-8. Menu Mode Settings List
Top Menu Menu Item
Settings
(shaded one is the default)
Explanation
Applied
model
Pro 7900/7910/9900/9910/9890/9908/7890/7908
Pro 7700/7710/7700M/7710M/9700/9710
Pro WT7900/WT7910
To Next Page
Loading...
