1-28
28 | Setting Up the Printer
Unpacking and Assembling the Stand
1. Open the box and remove the handles from the sides of the box.
2. Lift the box up, then set it aside.
3. Unpack the stand and make sure you have all these items:
Parts:
Tools and Accessories:
Base sections
Support bar
Basket hooks
Paper basket
Hex wrench
4 Bolts
2 Wing nuts with spring
washers and plain washers
5 Paper supports
7800-9800Guide.book Page 28 Monday, April 10, 2006 11:59 AM
To Next Page
Loading...
