1-51
Setting Up the Printer | 51
Updating the Firmware
1. Double-click the firmware file to extract it.
2. Click the
EPSON LFP Remote Panel icon on your desktop. You see
the LFP Remote Panel. Make sure your printer is selected.
3. Click the
Firmware Updater button.
Note: Although the
illustrations in this
section show Macintosh
screens, the procedure is
the same in Windows.
Note: For more
information on using the
LFP Remote Panel, click
Help to see the electronic
guide.
Tip: For best results, use
a USB connection when
you update the firmware
on your printer.
7800-9800Guide.book Page 51 Monday, April 10, 2006 11:59 AM
To Next Page
Loading...
