2-66
66 | Handling Paper and Other Media
Loading Small Cut Sheets or Fine Art Paper
You can load paper without releasing the paper lever. This prevents
scratching that might damage fine art paper, and is also easier, especially
when you are loading small sheets.
1. Make sure the printer is on and the roll paper cover is closed.
2. Press the l Paper Source button until the icon appears on the LCD
display.
3. Make sure the paper lever is in the locked position.
4. Feed the sheet into the paper slot. Make sure the right edge of the paper
is straight and aligned with the scale on the roll paper cover.
5. Press the Pause button. The sheet feeds into printing position
automatically and
READY appears on the control panel.
6. Print your page. After it is finished, the sheet stays in the printer.
7. To remove your print, press the button.
7800-9800Guide.book Page 66 Monday, April 10, 2006 11:59 AM
To Next Page
Loading...
