The Control Panel 199
4
4
4
4
4
4
4
4
4
4
4
4
English
3 Menu button r Enters the Menu mode when pressed in the
READY state. When pressed in the Menu mode,
a desired menu can be selected.
Enters PRINTER STATUS menu if pressed during
printing.
Cleans the print head if pressed and held for 3
seconds.
4Paper Source
button l
Selects a paper source (Roll Auto Cut On
/Roll Auto Cut Off /Sheet )
Returns to the previous level when pressed in
the Menu mode.
Enters the cutter replacement mode if pressed
and held for 3 seconds.
5 Paper Feed
button d
Feeds paper in the forward direction.
Changes the parameters in the forward order
when selecting a desired parameter in the
Menu mode.
6 Paper Feed
button u
Feeds paper in the reverse direction as much
as the paper has been fed by using the Paper
Feed d button.
Note:
If you have fed the paper forward by hand,
you cannot feed the paper in the reverse
direction by using this button.
Changes the parameter in the reverse order
when selecting a desired parameter in the
Menu mode.
To Next Page
Loading...
