200 The Control Panel
Lights
This section describes the functions of the lights on the control
panel.
The lights let you know the status of the printer and the type of
an error when it occurs.
7 Enter button Executes the item if the selected item is for
execution only.
When Sheet is selected, this button ejects
the cut sheet if pressed and held for 3 seconds.
When Roll Auto Cut On is selected, this
button cuts the paper automatically if pressed
and held for 3 seconds.
When Roll Auto Cut Off is selected, this
button feeds the paper if pressed and held for
3 seconds. Then the paper is cut using the
manual cutter unit.
When the printer is drying ink, this button stops
the ink drying process and ejects the paper if
pressed and held for 3 seconds.
Light Description
1Power light
(green)
On:
The printer is on.
Flashing:
The printer is receiving print data or shutting
down.
Off:
The printer is off.
2Pause light
(yellow)
On:
The printer is in the pause mode.
Off:
The printer is ready to print data.
To Next Page
Loading...
