Paper Handling 277
6
6
6
6
6
6
6
6
6
6
6
6
English
6. Load the sheet into the paper insertion slot so that the bottom
edge of the paper rests behind the open front cover. Make sure
that the right and bottom edges of the sheet are straight and
in line with the horizontal line and the vertical line.
7. Set the paper lever to the secured position, and then close the
front cover. PRESS PAUSE BUTTON appears on the LCD panel.
8. Press the Pause
button, and then follow the same
procedure used for other cut sheet media.
To Next Page
Loading...
