144
144 | Maintaining and Transporting the Printer
7. Hold the cartridge with the arrow pointing toward the printer. Then
insert the cartridge into the slot. Don’t force it in.
8. Lower the ink levers to their locked position.
9. Close the ink compartment covers.
Once the cartridge is installed, the printer returns to its
READY state.
Note: If you can’t insert
the cartridge smoothly,
you may have the wrong
cartridge. Check the
package and product
code. If the B Ink light
remains on after installing
the cartridge, it may not
be inserted fully.
Caution: Do not remove
and re-insert cartridges
more often than
necessary. Doing so can
compromise the needle
valve seal and allow air to
enter the ink tubes,
causing nozzle damage.
To Next Page
Loading...
