Epson Stylus Pro 7880 - Controlling Borderless Image Expansion

90
90 | Printing With Epson Drivers for Macintosh
3. Select either of the following options, if desired (available only when
you’ve selected a Paper Size setting with the
Roll Paper (Banner)
option):
• Print Page Line prints trim lines on the right and bottom edges of
your pages.
• Save Roll Paper saves paper by not feeding the blank portion of
the last page of your document.
Controlling Borderless Image Expansion
To control the amount of expansion when printing using a Paper Size with
the
Auto Expand option, select Expansion from the drop-down menu.
You see this screen:
Adjust the slider to increase or decrease the amount of expansion.
The widths shown in the table on page 78 work with the
Standard
Expansion setting. If you use the slider to adjust the amount of expansion,
you can calculate the image width as follows:
• Using the Min setting, subtract 0.125 inch (3.175 mm) from the media
width to determine the image width.
• Using the Max setting, subtract 0.415 inch (10.54 mm) from the media
width to determine the image width.