Pro 7900 and 9900 Field Repair Guide 10/6/10
Cleaning Unit Removal Printer Component, Software Item, LCD Display, Printer Button Page 39.
Cleaning Unit Removal
1. Remove the Right Side Cover.
2. Remove the AID Board.
3. Move the Carriage Assembly to the center of the Printer.
3.1 Follow the directions in the Carriage Release (Manual) Chapter found in the Reference Section.
Note: The Print Head is very fragile and can be damaged moving it away from the Cleaning Unit.
Move the Carriage Assembly to the center of the Printer.
To Next Page
Loading...
