Epson Stylus Pro 9000 - Environmental Specifications

EPSON Stylus Pro 9000 Revision B
Product Description SPECIFICATIONS 17
ENVIRONMENTAL SPECIFICATIONS
Temperature/Humidity: See the following table.
Notes:
1) When storing the printer, make sure the printheads are in the home, capped, position.
2) Before transporting the printer, remove the ink cartridges and turn the ink valves screws to
the closed position. Also make sure the printheads are in the home, capped, position. After
transporting the printer, install new ink cartridges.
3) When the temperature drops below -15°C (5
°F), the ink in the cartridges and printheads
freezes. The ink thaws completely after three hours at 25°C (77
°F).
Figure 1-2. Print Temperature and Humidity
Resistance to
Vibration & Shock: See the following table.
Table 1-9. Temperature & Humidity
Condition Temperature Humidity Notes
Operating
15~35°C
(59~95°F)
30~80%
• Less than a month at
40°C (104°F)
• Less than 120 hours at
60°C (140°F)
• Without condensation
Storage
-20~40°C
(-4~104°F)
20~85%
Transportation
-20~60°C
(-4~140°F)
5-85%
Table 1-10. Vibration & Shock Resistance
Condition
Vibration
Resistance
Shock
Resistance
Notes
Operating 0.15G
10~55Hz
1G
less than 1ms
X/Y/Z direction
Storage 0.50G
10~55Hz
2G
less than 2ms
Temp.
(°C)
Humidity (%)