Epson Stylus Pro 9000 - Removing the Housing; Maintenance Cover Removal

EPSON Stylus Pro 9000 Revision B
Disassembly & Assembly Disassembly Flow 73
4.2.1 Removing the Housing
This sections describes the removal procedure for printer housing parts. See
below for an illustration of the housing parts.
Figure 4-2. Housing Part Diagram
MAINTENANCE COVER REMOVAL
1. Open the Front Cover.
2. Remove 2 screws, CP(W2) M3x6, and then remove the Maintenance
Cover.
Figure 4-3. Maintenance Cover Removal
Roll Cover
Upper Paper Guide
(behind H Top Cover)
RSideCover
Maintenance
Cover
H Top Cover
Lower Paper Guide
Front Cover
LSideCover
CP(W2) M3x6 screw