Epson STYLUS PRO 9400 - Page 221

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Disassembly & Assembly Disassembly Procedure 221
4.2.3.2 H TOP COVER ASSY.
1. Open the FRONT COVER ASSY.
2. Remove the four screws that secure the H TOP COVER ASSY.
 Four C.B.S.(O) M4 x 8 screws
3. Slide the H TOP COVER ASSY. toward the front side and then lift it to remove it.
Figure 4-19. Removing the H TOP COVER ASSY.
Put the left and right edges of the H TOP COVER ASSY. on the
edge each of the L SIDE COVER ASSY. and the R SIDE COVER
ASSY.
Figure 4-18. Reinstalling the H TOP COVER ASSY.
L SIDE COVER
ASSY.
Edge
R SIDE COVER
ASSY.
Edge
C.B.S.(O) 4x8 C.B.S.(O) 4x8
C.B.S.(O) 4x8 C.B.S.(O) 4x8
H TOP COVER ASSY.
3-1
3-2