Epson STYLUS PRO 9400 - Tools for Adjustments

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Adjustment Overview 299
5.1.6 Tools for Adjustments
The table below shows the tools required for adjusting the Stylus Pro 7400/7800/9400/
9800.
Note "*1": The jig comes in a kit with multiple parts.
"*2": Use when make test prints for adjustment.
Table 5-3. Tools for Adjustments
Type Name Part Number Remarks
Hard
Tool
Ink Mark Sensor Position Jig *
1
1424365 For adjusting,
checking
P THICK Sensor Position Jig *
1
1424364 Thickness:
0.2/0.3/0.5/0.6
Cutter Position Jig 1424366 ---
Air leak measurement jig TBD ---
Kimoto, Micro Trace #300 1057723 ---
Tension Gauge F770 1060744 ---
Tension Gauge (10N) 1401952 ---
Ink Cartridges (8 pcs.)*
2
See Table 5-4 Consumables
Maintenance Tank*
2
C12C890191 Option
Premium Glossy Photo
Paper
24” (610 mm)
(Stylus Pro 7400/7800)
S041638 EPSON genuine
44” (1118 mm)
(Stylus Pro 9400/9800)
S041640 EPSON genuine
Doubleweight Matte
Paper
24” (610 mm)
(Stylus Pro 7400/7800)
S041385 EPSON genuine
44” (1118 mm)
(Stylus Pro 9400/9800)
S041387 EPSON genuine
Soft-
ware
Adjustment Program --- Supplies
NVRAM backup utility --- Supplies
EPSON LFP Remote Panel tool --- Supplies
Table 5-4. Ink Cartridge
Ink Name Part No. (Stylus Pro 7800/9800) Part No. (Stylus Pro 7400/9400)
Photo Black C13T562130 ---
Matte Black C13T566830 C13T566830
Cyan C13T562230 C13T566230
Magenta C13T562330 C13T566330
Yellow C13T562430 C13T566430
Light Black C13T562730 ---
Light Cyan C13T562530 ---
Light Magenta C13T562630 ---
Light Light Black C13T562930 ---