Epson STYLUS PRO 9400 - Skew Check

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Adjustment Basic Adjustment 333
5.3.14 Skew Check
 Paper Used
 Size: 24” (Stylus Pro 7400/7800)
44” (Stylus Pro 9400/9800)
 Type: Doubleweight Matte Paper
 Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [Skew Check].
3. Click the [Run] button. The roll paper will be ejected by about one meter and
a deviation in position of the left and right edge of the paper is detected by the
Multi Sensor.
4. When the deviation amount is displayed, click the [OK] button.
5. Click the [Finish] button and reset the roll paper.
Figure 5-52. [Skew Check] Screen
C A U T I O N
As about one-meter-length roll paper is ejected, keep the paper
ejection area clear of any obstacles.