Epson STYLUS PRO 9400 - Cleaning; Initial Ink Charge; Chapter 5 Adjustment

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Adjustment Basic Adjustment 339
5.3.19 Initial Ink Charge
 Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [Initial Ink Charge].
3. Press the F5 key to start the initial ink charge.
4. When the ink charge is completed, click the [Finish] button.
Figure 5-61. [Initial Ink Charge] Screen
5.3.20 Cleaning
 Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [Cleaning].
3. Select the cleaning type and press the corresponding key (F1 to F4) to perform
the selected cleaning.
4. When the cleaning is completed, click the [Finish] button.
Figure 5-62. [Cleaning] Screen
C A U T I O N
Check the remaining amount of ink before performing the initial
ink charge. If the remaining amount is lower than 50%, replace the
ink cartridge with a new one in advance.
Key Cleaning Amount of Ink Consumption Processing Time
F1 CL1 Approx. 2.9 g/8 colors Approx. One and quarter min.
F2 CL2 Approx. 3.8 g/8 colors Approx. One and quarter min.
F3 CL3 Approx. 7.8 g/8 colors Approx. One and quarter min.
F4 CL4 Approx. 29.2 g/8 colors Approx. Three and half min.