EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 37
1.4.1.2 Buttons
Table 1-27. Button Functions
Button
Functions
Function at the
panel setting
Function
(+ Power On)
Normal One Press Hold Down for Three Seconds*
1
Power Turns the power ON or OFF *
2
--- Power OFF ---
Pause
Stops or restarts the printer operation*
3
Waiting for paper initialization trigger*
3
Reset Interrupts panel
setting
Maintenance
mode
Menu
During printing
Changes the panel display to the Status Menu*
3
When Not printing
Shifts the printer into the Panel Setting Mode *
3
When the paper thickness sensor detects less than 0.8mm.
Runs a head cleaning*
4
When the paper thickness sensor detects 0.8mm or more
Runs a cleaning after a cleaning unavailable error is
removed.
* When the paper thickness sensor detects 0.8mm or more
during printing.
Does not function
Moves to the next
menu item
---
Paper Select
During printing
Does not function
When Not printing
Changes the paper type
Execute the Cutter Replacement Sequence*
5
Moves to the
previous menu
item
---
Paper Feed *
6
When roll paper is set
Back-feeds the roll paper
*Does not work when roll paper is not set
When releasing the paper set lever
Increases suction of the Paper Suction fan
When roll paper is set
Performs high-speed back-feeding of the roll paper
*Does not work when roll paper is not set
Increases the
setting value
---
Paper Feed *
6
When roll paper is set
Feeds the roll paper
*Does not work when roll paper is not set
When releasing the paper set lever
Decreases suction of the Paper Suction fan
When A4 to A3+ sized cut sheet is manually loaded
Feeds the cut sheet
When a cut sheet is set
Ejects the cut sheet
When roll paper is set
Performs high-speed feeding of the roll paper
*Does not work when roll paper is not set
Decreases the
setting value
---
Continued to next page
To Next Page
Loading...
