Epson STYLUS PRO 9400 - Page 40

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 40
Low
In hexadecimal dump
mode
PRINTING
Flashing OFF --- OFF X X X X X {{X
Printing of internal data PRINTING Flashing OFF --- OFF X X X X X {{{
Initial cutting CUTTING PAPER
PLEASE WAIT
ONOFF---OFFXXXXXXX{
Waiting for paper
initialization trigger
PRESS PAUSE BUTTON
ON ON --- OFF { X { X *
4
XX{{
Cleaning unavailable CLEANING ERROR
REMOVE THICK PAPER
ONON---ONXXXXXXX{
Initializing operation*
5
PLEASE WAIT FlashingOFF---OFFXXXXXXX{
Cleaning failure CLEANING ERROR
PRESS PAUSE BUTTON
ONON---FlashingXXXXXX{{
Ink mark sensor
SN gain error
Paper recognition error
SENSOR ERROR
LOAD DIFFERENT PAPER
ONON---Flashing---XXXXXX{
Paper eject error PAPER EJECT ERROR
REMOVE PAPER FROM
PRINTER
ONON---Flashing---XXXXXX{
Roll paper out PAPER OUT
LOAD PAPER
ON ON --- ON --- X X X X { X {
Borderless printing
unavailable
BORDERLESS ERROR
LOAD CORRECT SIZE
PAPER
ON ON --- Flashing X X X { XXX{
Paper recognition PAPER ERROR
LOAD PAPER PROPERLY
ON ON --- Flashing --- X X { XXX{
Paper skew/
Cut sheet loading error
PAPER SKEW
LOAD PAPER PROPERLY
ON ON --- Flashing --- X X { XXX*
6
{
Paper cut error*
7
PAPER CUT ERROR
REMOVE UNCUT PAPER
ON ON --- Flashing --- X X { XXX{
High
Command error COMMAND ERROR
CHECK DRIVER SETTINGS
FlashingONFlashingFlashingXXXXXXX{
Continued to next page
Table 1-28. Panel Display (continued)
Priority
Printer Status Messages on the LCD
LED Status Panel Button Function
Power Pause Ink Paper
Paper
Select
Enter
Paper
ejection
(3 sec.)
Paper feed Menu
Cleaning
(3 sec.)
Pause
Reset
(3 sec.)