Epson STYLUS PRO 9400 - Page 46

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 46
1.4.2.2 Icons on the LCD
 Paper Source
An icon corresponds to the selected media type (roll or cut sheet) is displayed.
 Custom Paper No.
The user-defined paper setting number created by the CUSTOM PAPER function in
the panel setting menu is displayed. See “1.4.4.31 Custom Paper”
(p.87) for more
information on the CUSTOM PAPER.
 Platen Gap Setting
The platen gap setting made by the PLATEN GAP function in the panel setting menu
is indicated. It does not appear when using the CUSTOM PAPER setting.
 Roll Paper Margin
Margin setting for roll paper is indicated. It does not appear when the setting is default.
 Roll Paper Counter
The remaining amount of the roll paper is indicated. This icon appears when REMAINING
PPR SETUP in the Maintenance mode has been set to ROLL and the Roll Paper Counter
setting has been made.
 Roll paper counter icon:
Table 1-29. Paper Source Icon
Paper type LCD
Roll paper auto cut ON
Roll paper auto cut OFF
Cut sheet
Table 1-30. User Paper Setting No. Icon
User Paper
Setting No.
LCD
1
2
9
10
… …
Table 1-31. Platen Gap Location Setting Icon
Platen Gap Location Setting LCD
Widest
Wider
Wide
Narrow
Table 1-32. Roll Paper Margin Icon
Platen Gap Location Setting LCD
TOP/BOTTOM 15mm
TOP 35mm /BOTTOM 15mm
3mm
15mm