Epson STYLUS PRO 9400 - Page 72

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 72
1.4.4.17 Initialize Settings
This function allows you to return all settings in the PRINTER SETUP menu to their
default except the Roll Paper Counter (both the roll paper settings and the usage
counter).
The table below shows the target setting items and their default.
 Initialize Settings menu
1.4.4.18 Printing Nozzle Check Pattern (Test Print Menu)
The nozzle check pattern printed by executing the Nozzle Check in the TEST PRINT
menu has two types; one for automatic checking and the other one for manual
checking. Switching between the automatic and manual nozzle checking is made by
the Auto Cleaning setting. Both patterns are printed with the following information; the
firmware version, available capacity of the Maintenance Tank, and usage counters for
paper and ink.
 Auto Nozzle Check pattern.
 Order of colors (Stylus Pro 7800 and Stylus Pro 9800: from left)
Photo Black / Matte Black→Cyan→Magenta→Ye ll ow →Light Light Black→
Light Magenta→Light Cyan→Light Black
Figure 1-13. Auto Nozzle Check Pattern (Stylus Pro 9800)
 Order of colors (Stylus Pro 7400 and Stylus Pro 9400: from left)
Matte Black→Cyan→Magenta→Ye llow→Matte Black→Cyan→
Magenta→Yellow
Figure 1-14. Auto Nozzle Check Pattern (Stylus Pro 9400)
Table 1-41. Printer Setup Value Initialization
Setting Item After Initialization
PLATEN GAP STANDARD
PAGE LINE ON
INTERFACE AUTO
CODE PAGE PC437
ROLL PAPER MARGIN DEFAULT
PAPER SIZE CHECK ON
PAPER SKEW CHECK ON
TIME OUT OFF
CUTTER ADJUSTMENT (Manufacture setting)
REFRESH MARGIN ON
AUTO NOZZLE CHECK ON
AUTO CLEANING ON
QUIET CUT OFF
INITIALIZE SETTINGS
EXECUTE
PLEASE WAIT
PRINER SETUP
AUTO CLEANING
QUIET CUT
INITIALIZE SETTINGS
Version :SW<Z><xxxx>.IBCS
MaintenanceTank Left:<yyy>% MaitenanceTank Right:<yyy>%
Cur.InkCount :<aaaaa.a>ml Pre.InkCount :<bbbbb.b>ml C-P:<ccccc.c>ml
Cur.PaperCount:<ddddd.d>cm Pre.PaperCount:<eeeee.e>cm C-P:<fffff.f>cm
Version :SW<Z><xxxx>.IBCS
MaintenanceTank Left:<yyy>% MaitenanceTank Right:<yyy>%
Cur.InkCount :<aaaaa.a>ml Pre.InkCount :<bbbbb.b>ml C-P:<ccccc.c>ml
Cur.PaperCount:<ddddd.d>cm Pre.PaperCount:<eeeee.e>cm C-P:<fffff.f>cm