Epson STYLUS PRO 9400 - Page 83

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 83
1.4.4.27 Clear Usage Counter
 Clear Usage Count - INK
Resets the “Ink usage counter” to 0.
 Clear Usage Count - PAPER
Resets “Paper usage counter” to 0.
 Clear Usage Count menu
1.4.4.28 Job History
The “Job History” displays job history report (up to 10 jobs) stored on the printer.
 Job No.
A number assigned to each job report in reverse chronological order. The number
of the latest job is 0.
 Paper usage
A total area of paper consumed for each job is displayed (height x width = cm
2
)
NOTE: The printer sums up paper feed amounts performed by JS to JE
commands.
 Ink usage
An amount of ink consumed for each job is displayed by the milliliter.
NOTE • The printer sums up the amount of ink consumed by IR command, or JS to
JE commands.
• If IR or JS/JE commands are not specified in the job, ink usage is not
counted.
• "---" is displayed if the corresponding value cannot be obtained.
 Job History menu
[ / ]
[ ]
[ ]
Executes
the operation
[ ]
Executes
the operation
CLEAR USAGE COUNT
INK EXEC
PAPER EXEC
CLEAR USAGE COUNT
INK EXEC
PAPER EXEC
PRINTER STATUS
USAGE COUNT
CLEAR USAGE COUNT
JOB HISTORY
JOB HISTORY
NO.0
INK xml
PAPER xxxxxxxcm
2
JOB HISTORY
NO.1
INK xml
PAPER xxxxxxxcm
2
JOB HISTORY
NO.8
INK xml
PAPER xxxxxxxcm
2
JOB HISTORY
NO.9
INK xml
PAPER xxxxxxxcm
2
PRINTER STATUS
CLEAR USAGE COUNT
JOB HISTORY
TOTAL PRINTS