Epson Stylus Pro 9500 - Contents of the Packaging

EPSON Stylus Pro 9500 Revision A
Maintenance & Setup Unpacking and Installing 224
6.2.2 Contents of the Packaging
See the following for the contents of the large and medium size boxes.
MEDIUM-SIZE BOX
Parts packed in the medium-size box are as follows.
o Legs x 2 (one for left and right)
o Leg connections x 2 (for connecting the right and left legs / one each for
top and bottom)
o Paper Eject Tray (Cloth/ metal shafts are attached inside)
o Tray Hooks x 2 (one each for right and left)
o Pins x 2
o Hexagon (Allen) wrench x 2 (large: 5mm / small: 4mm)
o Bolts (4 kinds)
n For assembling the stand
* 8 bolts with hexagon hole (M6 x 30)
* 6 bolts with hexagon hole (M6 x 10)
n
For connecting the printer body and stand
* 2 washer bolts with hexagon hole (M6 x 12)
* 2 flange bolts with hexagon hole (M6 x 12)
LARGE BOX
The following parts are in the large box.
o EPSON Stylus Pro 9500 printer body
o 2 Spindles for roll paper (for 2-inch diameter roll paper)
o Accessory Box
* Ink Cartridges x 6 (one for each color)
* Roll paper
o
Documentation Box (Guide Books and CD-ROM, etc.)