Epson Stylus Pro 9500 - Control Panel Settings

EPSON Stylus Pro 9500 Revision A
Product Description Control Panel 28
1.3.2 Control Panel Settings
PANEL SETTING MENU SELECTION
By pressing the “SelecType” button while the printer is not printing, the printer
switches to the panel setting mode and the printing state is automatically
disabled. The following menu items are listed in the Panel Setting Mode, and
the setting menu is switched in order and displayed in the LCD each time the
“SelecType” button is pressed once. When selecting a menu, press the “Paper
Source” button once.
To return to the print ready state, press the “SelecType” button until the “Print
Ready” message is displayed in the LCD panel, or press the “Pause” button.
o Menu Selection: “SelecType” Button
o Selecting a Menu Item: “Paper Source” Button
o Mode End: “Pause” Button.
Selecting a menu provides you with detailed options.
Table 1-20. Control Panel Settings
Menu Item Panel Display
SelecType Menu PRINTER SETTING MENU
Test Print Menu TEST PRINT MENU
Printer Status Menu PRINTER STATUS MENU
Paper Settings Menu PAPER CONFIG.MENU
Cutter Replacement Menu CUTTER REPLACE MENU
Head Alignment Menu HEAD ALIGNMENT MENU