Pro 7900 and 9900 Field Repair Guide 10/6/10
CR Head Slant Adjustment Printer Component, Software Item, LCD Display, Printer Button Page 291.
CR Head Slant Adjustment
Note: The CR Head Slant adjusts the Print Head rotation, ensuring that Nozzle 1 for black is linear with
Nozzle 1 for yellow (same vertical position).
1. Load 24” Doubleweight Matte roll paper.
2. Print the CR Head Slant Adjustment Pattern.
2.1 Self Testing Mode: Down, Right, and OK buttons, and turn on the Printer.
2.2 Navigate to SELF TESTING\Mecha Adjustment\CR Head Slant\[Enter] Print
2.3 Press the Enter button to print.
2.4 The Printer will print the alignment pattern.
The alignment pattern.
Paper Feed
Direction
To Next Page
Loading...
