Pro 7900 and 9900 Field Repair Guide
CTP Plate Guide Alignment Printer Component, Software Item, LCD Display, Printer Button Page 296.
3. Load a Plate into the Printer.
1. Press the Pinch Roller Release button to open the
Pinch Rollers.
2. Press the Up button to set the suction to maximum.
3. Place the Plate in the Media Path.
4. Ensure that the Plate is held against 2
Points on the Plate Guide.
5. Press the Pinch Roller
Release button to close the
Pinch Rollers to load the
Plate.
To Next Page
Loading...
