75
Handling Paper and Other Media | 75
3. Feed the sheet into the paper slot until it meets resistance. Make sure the
right edge of the paper is straight and aligned with the vertical line on
the roll paper cover.
4. Press d. The sheet feeds into printing position automatically.
5. If you see a question on the display about paper settings, select
Yes if the
settings are correct, or select
No, then change the settings.
6. Press
OK.
7. Print your page. After it is finished, the sheet stays in the printer.
8. To remove your print, press the d button while holding the sheet.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
