Epson Stylus Pro 9900 - Page 308

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 308
Confidential
15. Remove the three screws that secure the Ink Tube Holder. See Figure 4-164.
B) Silver, Phillips, Bind P-tite with S.W & P.W. M3x8: three pieces
16. Disengage the two hooks that secure the Ink Tube Holder, and remove the Ink
Tube Holder.
17. Remove the two screws that secure the Ink Tube Cover, and remove the Ink Tube
Cover. See Figure 4-165.
B) Silver, Phillips, Bind P-tite with S.W & P.W. M3x8: two pieces
Figure 4-164. Removing the Ink Tube Holder
Figure 4-165. Removing the Ink Tube Cover
B
Ink Tube Holder
Hooks
B
Ink Tube Cover