Epson Stylus Pro 9900 - Page 334

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 334
Confidential
4.4.8.8 Power Supply Board
1. Remove the Color Measurement Device. (p325)
2. Remove the Mounter. (p327)
3. Remove the Front Cover. (p331)
4. Disconnect all the connectors (CN1, CN2) on the Power Supply Board.
5. Remove the six screws that secure the Power Supply Board, and remove the Power
Supply Board.
A) Silver, Phillips, Bind machine screw M3x6: six pieces
Figure 4-205. Removing the Power Supply Board
A
CN2
CN1
Power Supply Board