4 Make sure the replacement cartridge is the correct
color and remove it from its package. Gently
shake the cartridge before installing it.
5 Hold the cartridge with the
arrow mark pointing toward
the printer. Then insert the
cartridge into the slot. Don’t
force it.
Note: If you can’t insert the cartridge smoothly,
you may have the wrong cartridge or are trying
to insert it into the wrong slot. Check the package
and part number. If the Ink light remains on
after installing the cartridge, try removing and
then reinserting it.
6 Close the ink cover.
Checking Ink Levels and Replacing Ink Cartridges (continued)
Replacing Printer Parts
Replacing the Paper Cutter
If you notice that the paper isn’t cut cleanly, you may
need to replace the cutter (part # C1C815351).
1 Turn off the printer.
2 Open the ink cartridge covers.
3 Open the printer cover.
4 Use a cross-head screwdriver to remove the four
screws holding the front cover in place, then remove
the front cover.
7
To Next Page
Loading...
