Epson StylusPro 10000 - CSIC Board Removal

EPSON Stylus Pro 10000/10000CF Revision A
Disassembly & assembly Disassembly Flow
1
37
4.2.2.4 CSIC Board Removal.
1. Remove the “R Side Cover” as described in paragraph 4.2.1.3.
2. Remove the cables from the following connectors.
Figure 4-52.
3. Remove four screws, then remove the CSIC board.
Figure 4-53.
Table 4-3. CSIC Board Connectors
Connector
#
Pins Color
Clamp
Location
Connection Notes
CN1 W / K I/C Holder Cover Sensor
CN2 FC C362DRV CN29
CN3 FC
Ink Cartridge type (color)
Sensor : Black
CN4 FC
Ink Cartridge type (color)
Sensor : Cyan
CN5 FC
Ink Cartridge type (color)
Sensor : Magenta
CN6 FC
Ink Cartridge type (color)
Sensor : Light Cyan
CN7 FC
Ink Cartridge type (color)
Sensor : Light Magenta
CN8 FC
Ink Cartridge type (color)
Sensor : Yellow
CN9 3
GRAY x 2
W
InkPumpASSY
Vacuum sensor
R
CN10 3
GRAY x 2
W
Creaning Unit
Location detect sensor
Blk
CN11 3
GRAY x 2
W
InkPumpASSY
Carriage Lock Sensor
W
T_457
CN1
CN9
CN10
CN11
CN3 CN4 CN5 CN6 CN7 CN8
CSIC Board
Flat cable
Ink Cartridge Holder / Slots
Screw
Screw