Epson StylusPro 10000 - Parameter Display; Reliability Test

EPSON Stylus Pro 10000/10000CF Revision B
Adjustment
S
elf-Diagnostics
2
64
5.3.7.3 Parameter display
Display the parameter of designated address.
Following figure showing the parameter display menu sequence.
Figure 5-96.
5.3.8 Reliability Test
Perform the reliability test of the mechanism and the head.
Following table showing the items.
Following figure showing the reliability test menu sequence.
Item
SelecType
Enter
Address : 0
000
Address : 0 0 00
Address : 0 0 0
0
Address: 0000
0000 : 0
Adjustable with
"Paper Feed +/-"
key.
Enter
Enter
Enter
Item
Item
Item
SelecType
SelecType
SelecType
Table 5-21. Reliability test
Item Description
CR Motor Bi-D carriage movement
PF Motor Drive PF roller.
CR+PF Motor CR and PF operation at same time.
Cutter Paper cut
Head Up/Down Continuous head Up/Down.
Head Lock Continuous head lock and release.
Lever Lock Continuous lever lock and release.
Cleaning Cleaning
Print Reliability Continuous printing
Shutter Shutter reliability
Total reliability CR,PF,CR+PF, Head Up/Down, Cutter solenoid.
Reliability confirmation Confirm the number of reliability test.