EPSON Stylus Pro 10000/10000CF Revision B
Product Description Interfaces 29
1.3 Interfaces
The EPSON Stylus Pro 10000/10000CF is equipped with parallel and USB interfaces as
well as an expansion slot for an optional Type-B interface. This section provides
information on each of these interfaces.
1.3.1 Parallel Interface
COMPATIBILITY MODE
Table 1-12. Parallel Interface Specifications
Item Description
Transmission mode 8-bit parallel, IEEE-1284 compatibility mode
Synchronization By STROBE pulse
Handshaking By BUSY and ACKNLG
signal
Logic Level
TTL compatible level (IEEE-1284 Level 1 device)
Connector
57-30360 (Amphenol) or equivalent
Note: Use a twisted-pair cable that is as short as possible.
To Next Page
Loading...
