101
Printing from a USB Memory Device
You can connect a USB memory device to the printer and print jobs saved from Garment Creator 2. You
can also save print jobs to a USB memory device that is connected to your computer or to the printer.
Note: When a USB memory device is connected to the printer, the last print data sent from Garment
Creator 2 is automatically saved to the USB memory device as temporary reprint data with the filename
Epson_repeat_print.prn. If there is a misprint or you run out of media, you can repeat printing simply by
operating the printer without having to send the print job again. See the Garment Creator 2 online help
for more details on saving data.
USB Memory Device Requirements
Connecting and Printing from a USB Memory Device
USB Memory Device Requirements
Make sure your USB memory device meets these requirements.
Note: Connections that use an extension cable, a USB hub, or a card reader cannot be guaranteed.
• FAT device compatible with Windows
• Format type: FAT, FAT 32, or exFAT
• No security functions such as encryption or passwords
• Memory capacity: Up to 2TB
• Partitions: 1
Requirements for data
• Data name: Up to 255 single-byte characters
• Data size: Up to 4GB
• Number of data items: Up to 999 (.prn files only)
Note: The printer only searches the root folder on the USB memory device for files with a .prn file
extension. If the data is saved in a sub-folder or named with a different file extension, it does not display
when the USB memory device is connected to the printer.
To Next Page
Loading...
