121
Caution: Make sure the ink pack fits onto the pegs and is aligned with the top of the tray.
6. Use a seesaw motion to gently shake the tray about 5 times within 5 seconds. If you are replacing a
White ink pack, shake it about 25 times within 25 seconds.
7. Match the color on the ink pack label with the color for the slot on the printer, then insert the ink tray
into the slot and push it in firmly.
Caution: The ink packs are keyed to fit into the correct color slot. If you cannot insert the ink tray all
the way, do not force it. Make sure the ink pack color matches the color for the slot on the printer.
8. Repeat these steps for any other ink packs that need replacing.
Note: Dispose of used ink packs carefully. Do not take the used ink pack apart or try to refill it.
9. When you are done replacing ink packs, close any open ink covers on the printer.
To Next Page
Loading...
