122
10. Follow the instructions on the LCD screen to begin ink charging.
Note: Do not turn off the printer, open any covers, or try to perform any other operations while the
printer is charging or you'll waste ink.
Your product begins charging the ink delivery system. A message appears on the LCD screen when
ink replacement is complete.
Parent topic: Shaking and Replacing Ink Packs
Related references
Handling Ink and Cleaning Packs
Handling White Ink
Ink Pack Safety Instructions
Optional Equipment and Replacement Parts
Using the Ink Cleaning Solution
Use the ink cleaning solution to clean around the suction cap and print head, clean the platen without a
grip pad, clean the sensor cover, and clean the encoder strip (carriage scale).
Caution: Always wear gloves when using ink cleaning solution, and follow these safety instructions:
• Use the ink cleaning solution to clean only the parts mentioned above or you could damage the
printer.
• If cleaning solution gets on to your skin, immediately wash it off using plenty of soap and water.
Consult a physician if the skin appears irritated or discolored.
• If cleaning solution gets in your eyes, rinse immediately with water. Failure to observe this precaution
could result in bloodshot eyes or mild inflammation. If problems persist, consult a physician.
• If cleaning solution gets in your mouth, consult a physician immediately.
• If cleaning solution is swallowed, do not induce vomiting and consult a physician immediately. If
vomiting is induced, fluid may get caught in the trachea which can be dangerous.
• Depending on the usage and storage environment, the ink cleaning solution may change color after
opening.
• If you notice that the cleaning solution has changed color or emits a bad odor, stop using it and open a
new maintenance kit.
• Close the cleaning solution lid securely after use, and store it out of reach of children. Avoid storing it
in locations subject to high temperatures, high humidity, and direct sunlight.
To Next Page
Loading...
