Epson SureColor F2270 - Cleaning the Sensor Cover

127
The print head returns to its normal position.
6. Perform a nozzle check.
Parent topic: Maintenance
Related tasks
Using the Ink Cleaning Solution
Performing a Nozzle Check
Related topics
Disposing of Used Consumables and Optional Parts
Cleaning the Sensor Cover
Clean the sensor cover when you see a message on the LCD screen to do so.
Caution: Do not move the platen manually; otherwise, a malfunction may occur.
Note: If you continue to use the printer without cleaning the sensor cover, the printer may not detect the
position of the platen and you cannot print.
1. Turn on the printer, if necessary.
2. Do one of the following:
• If a message appears on the LCD screen prompting you to clean the sensor cover, select the
message and then select Cleaning.
• If you want to clean the sensor cover before the message appears, select Menu > Maintenance >
Cleaning the Maintenance Parts > Sensor Cover.
A confirmation message is displayed.
3. Select Start.
The platen moves to the maintenance position.
4. Select How To... and follow the on-screen instructions.
Note:
• If the ink stains cannot be removed completely, use ink cleaning solution instead of water.
• The red and green lights inside the clear part are LED lights and they cannot harm your eyes.