Epson SureColor F2270 - Preparing the Pre-Treatment Solution

32
• Do not put waste pre-treatment solution in the waste ink bottle as it will solidify if mixed with waste ink.
Caution: Pre-treatment solution is classified as industrial waste and must be disposed of by an industrial
waste disposal company according to local laws and regulations. When handing over the pre-treatment
solution to an industrial waste disposal company, make sure you include these safety precautions.
Parent topic: Pre-treating a T-shirt
Preparing the Pre-treatment Solution
Prepare the pre-treatment solution for application to the T-shirts.
1. To attach the tap, cut the cardboard along the perforations and remove the tap from inside the
cardboard box.
2. Pull the cap section out of the hole in the cardboard.