38
• A bottle for filtration with a capacity of at least one liter (a bottle with measurement markings is
recommended)
Note:
• Replace the filter with a new one after every liter of pre-treatment solution that is filtered
• Do not reuse filters even if they did not filter one liter of solution. Any pre-treatment solution on the filter
could get mixed in and cause unevenness to occur.
• Use filtered pre-treatment solution within four days.
• Make sure you filter the solution within the operating temperature range of the pre-treatment solution.
1. Place the pre-treatment solution container at the edge of a table with its spout pointing down.
To Next Page
Loading...
