82
Loading a Shirt on the Medium-Grooved Platen
Before printing, carefully load a shirt onto the medium-grooved platen.
Note: Make sure that the correct platen is installed on the printer.
1. Turn on the printer, if necessary.
2. If the platen is not in the forward position, press the moveable base button to move the platen
forward.
3. Remove the platen frame.
4. Load the T-shirt by sliding the hem of the T-shirt over the platen from the front.
• For polo shirts: Make sure that the collar or button section of the shirt fits into the cutout on the
platen. Then go to step 6.
To Next Page
Loading...
