94
Related references
Platen Height Error Is Displayed While Printing
Related tasks
Attaching or Removing Spacers
Registering and Using Media Settings
You can store and recall commonly used media settings.
Note: You can register up to 30 media settings.
1. Turn on the printer, if necessary.
2. Select Media.
3. Select Media Management.
The list of media settings appears.
4. Do one of the following:
• To register media settings, select an empty row, select Change Name, and then enter a name.
Select OK, and then return to the Home screen and execute Print Adjustments.
The adjustments are saved to the media settings.
• To use saved media settings, select the > arrow icon for the row of the media settings you want to
use, then select Use This Setting.
Note: You can also copy, edit, or delete the selected media settings from this screen.
Parent topic: Determining the Height of the Platen
Related references
Media Settings
Starting a Print Job
When the printer has finished receiving data, a preview appears on the printer's screen and the start
light turns on and you can start the print job.
To Next Page
Loading...
