EasyManua.ls Logo

Epson SureColor F6200 - Replacing the Chip Unit and Refilling Ink

Epson SureColor F6200
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Epson cannot guarantee the quality or reliability of non-genuine ink. The use of non-genuine ink may
cause damage that is not covered by Epson's warranties, and under certain circumstances, may
cause erratic printer behavior.
Information about non-genuine chip unit status may not be displayed, and use of non-genuine ink is
recorded for possible use in service support.
Warning: Should ink contact your skin or enter your eyes or mouth, immediately take the following
actions:
If fluid contacts your skin, immediately wash it off using large volumes of soapy water. Consult a
physician if the skin appears irritated or discolored.
If fluid enters your eyes, rinse them immediately with water. Failure to observe this precaution could
result in bloodshot eyes or mild inflammation. If problems persist, consult with a physician.
If swallowed, do not induce vomiting and consult with a physician immediately. Inducing vomiting may
cause material to get in your windpipe and cause injury.
Parent topic: Replacing the Ink and Chip Unit
Replacing the Chip Unit and Refilling Ink
Follow the steps here to replace the chip unit and refill the ink in your product.
56

Table of Contents

Related product manuals