Note: If you need to eject the paper from the rear of the printer without printing, press the roll paper
button for three seconds. Remove the paper and press the roll paper button again to clear the
flashing paper/cancel light
Parent topic: Loading Media
Related references
Cut Sheet Media Loading Capacity
Available Epson Papers
Related tasks
Loading Roll Paper
Loading Paper in the Sheet Feeder
Loading Posterboard and Thick Media
Loading Posterboard and Thick Media
Use the front manual feed tray to load media with a thickness of 0.028 to 0.051 inch (0.7 to 1.3 mm).
Caution: Do not open the front manual feed tray or load thick paper while the product is operating. This
may damage your product.
Note: Be sure to leave at least 13 inches (32 cm) of space behind your product for the media to feed
through.
1. Turn on your product.
2. Remove any paper from the sheet feeder and close the paper support.
3. Remove any roll paper and the roll paper holders.
4. Open the front cover.
28
To Next Page
Loading...
