Replacing ink cartridges | 29
4.
Make sure you have the correct color for the replacement cartridge and remove it from its package.
Gently shake the cartridge for about 15 seconds before installing it. Do not touch the green chip on
the cartridge.
5. Hold the cartridge with the arrow pointing toward the printer. Then insert the cartridge into the slot
until it clicks into place. Do not force it in.
Caution: Do not remove and re-insert cartridges more often than necessary. Doing so can compromise the
needle valve seal and allow air to enter the ink tubes, causing nozzle damage.
Note: If the ink cartridges are not used on a frequent basis, remove the cartridges every 3 months, shake
them gently for 10–15 seconds, and re-insert them.
To Next Page
Loading...
