32
Loading Cut Sheets in the Paper Cassette
Loading Cut Sheets in the Rear Manual Feeder
Loading Cut Sheets in the Front Manual Feeder
Adjusting the Platen Gap
Parent topic: Media Handling
Loading Cut Sheets in the Paper Cassette
You can print on a variety of paper types and sizes up to 17 inches (43 cm) wide and 0.1 inch (0.27 mm)
thick from the paper cassette.
1. Make sure the printer is turned on.
2. On the control panel, press the paper source button.
3. Press the down arrow button to select Cut Sheet, and press the OK button.
4. Lift the edge of the output tray to remove it.
To Next Page
Loading...
