184
2. Make sure the correct paper type is selected.
Note: If you are using commercially available paper, make sure you create the custom paper
settings in advance.
3. Select Menu > Paper Setting > paper source > Print Adjustments > Paper Feed Adjust.
4. Select Start to print the adjustment patterns.
5. Follow the instructions on the LCD screen to select the best result in each pattern set. Look for the
result that looks closest to a rectangle with no design. In the following example, 0 is the best choice:
6. Once you have made selections for all adjustment patterns, select OK.
A confirmation screen is displayed.
7. Select OK.
When adjustments are complete, the Home screen is displayed.
Parent topic: Media Setting Optimization
Related tasks
Creating Custom Paper Settings Using the Control Panel
Loading Cut Sheets in the Rear Manual Feeder
Loading Media in the Front Manual Feeder
Loading Cut Sheets in the Paper Cassette
Loading Roll Paper
Related topics
Using Epson Media Installer
Aligning the Print Head Using the Product Control Panel
If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or
light horizontal bands, you may need to align the print head.
1. Load the roll paper or cut sheet paper you want to print on in the printer.
Note: Load paper that is at least this size or larger: A4 (8.3 × 11.7 inches [210 × 297 mm]).
To Next Page
Loading...
