151
7. Remove the new cartridge from the package. Then gently shake the cartridge for about five
seconds.
Caution: Do not touch the green chip on the cartridge.
8. Insert the new cartridge with the arrow facing up and push it in until it clicks into place.
Caution: Do not remove and re-insert cartridges more often than necessary. Doing so can break the
needle valve seal and allow air to enter the ink tubes, damaging the nozzles.
9. Close the ink cartridge cover and push it in until it clicks into place.
Your product begins charging the ink delivery system.
Note: Do not turn off the product during ink charging.
To Next Page
Loading...
