7. Press when you finish entering your password and select Proceed.
8. Confirm the displayed network settings and select OK to save them.
Note: If you need to change a setting, press the back button.
9. If you want to print a network setup report, select Print. (Otherwise, select Done.)
10. Press the home button to exit.
Your product should now be connected to the network.
Note: If the WiFi connection symbol does not appear lit on the touch screen, you may have selected
the wrong network name or entered the password incorrectly. Repeat these steps to try again.
Parent topic: Wi-Fi Infrastructure Mode Setup
Related tasks
Changing a Wi-Fi Connection to a Wired Network Connection
Wi-Fi Direct Mode Setup
You can set up your product to communicate directly with your computer or another device without
requiring a wireless router or access point.
1 Epson product
2 Computer with a wireless interface
29
To Next Page
Loading...
